Product ID:NICKEL SULFAMATE SOLUTION
MSDS Date:01/01/1987
FSC:6810
NIIN:00-437-6583
MSDS Number: BDYWZ

MCGEAN CHEMICAL CO INC.

Emergency Phone: (216)621-6425

Cage: 3P663

MCGEAN-ROHCO INC

ATLANTA, GA 30310-4004 US

Telephone: 216-441-4900

Cage: 8U841

NICKEL SULFAMATE

CAS: 13770-89-3

RTECS: QR9275000

Fraction By Weight: UNK

OSHA PEL 0.1 MG/M3 (NI)

ACGIH TLV: 0.1 MG/M3 (NI); 8990

WATER CAS#7732-18-5

Fraction By Weight: UNK

Effects of Overexposure:INHAL:IRRITATION TO MUCOUS MEMBRANE OF THE
UPPER RESPIRATORY TRACT.EYES:IRRITATION.SEE SUPP.DATA.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:NONE
Extinguishing Media:NOT SPECIFIED
Fire Fighting Procedures:NOT SPECIFIED (ANY FIRE-FIGHTING AGENT)
Unusual Fire/Explosion Hazard:NOT SPECIFIED

Spill Release Procedures:USE PROPER PERSONAL PROTECTIVE
EQUIPMENT.COLLECT SPILLED MATERIAL IN A SUITABLE CONTAINER.MAY BE
ABSORBED IN VERMICULITE.DRY SAND,EARTH,OR SIMILAR MATERIAL.

Handling and Storage Precautions:STORE IN COOL AND DRY PLACE.AVOID
EXTREME HEAT OR COLD
Other Precautions:AVOID SKIN AND EYE CONTACT.DO NOT BREATH MIST OR
FUMES.USE PROPER PERSONAL PROTECTIVE EQUIPMENT.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS DATED JAN,1982.EFFECTS OF OVEREXP:SKIN:IRRITATION,SENSITIZATION OR
NICKEL ITCH.INGESTION:NAUSEA,GIDDINESS.NOTE:NICKEL BE TREATED AS
OCCUP.CARCINOGEN(PER NIOSH RECOMMENDATION)

HCC:N1
Boiling Pt:B.P. Text:AS WATER
Vapor Pres:760
Vapor Density:1.0
Spec Gravity:1.54
Evaporation Rate & Reference:AS WATER
Solubility in Water:COMPLETE
Appearance and Odor:GREEN LIQUID,ODORLESS,PH= 4
Percent Volatiles by Volume:>90

Stability Indicator/Materials to Avoid:YES
ACIDS,STRONG ALKALIS
Stability Condition to Avoid:NOT SPECIFIED
Hazardous Decomposition Products:NOT SPECIFIED
Conditions to Avoid Polymerization:HIGH TEMPERATURE

Waste Disposal Methods:CONSULT LOCAL AUTHORITIES.DISPOSAL MUST BE IN
ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.